Oliezi AirPump User Guide

What's Included with Your AirPump

Each Oliezi Outdoors AirPump comes with the following:

  • 1x Rechargeable AirPump
  • 1x Air Hose with
  • 6x Removable Hose Tips
  • 1x Carrying Bag
  • 1x AC Power Adapter
  • 1x DC Power Adapter (Not Removable)

Powering on the AirPump

To power on the Oliezi AirPump, press and hold the power button for 3 seconds. The screen will be illuminated when it is powered on. Hold the power button for another 3 seconds to turn off.

To use the light: When the screen is illuminated, press the Lightbulb button one time to activate the lights on the front of the AirPump, a second time to strobe the lights, third to turn them off. If the screen is not illuminated, press once to illuminate, then the above directions apply.

Reading the Screen & Adjusting Pressure

[SET]: displays the set pressure the pump will fill up to before shutting itself off. 

[REAL]: displays the current pressure in the item being inflated.

[Battery]: displays the current battery level in your AirPump.

Adjusting Pressure: to adjust the set pressure, simply press the "+" or "-" buttons until the set pressure indicator displays your desired pressure.

Attaching the Hose

To attach the inflation hose, thread the large end of the hose onto the “Inflate” nozzle on the AirPump.

To use the pump to assist in deflation, thread the large end of the hose onto the “Deflate” nozzle on the AirPump.

AC Charging the AirPump

To charge with AC (wall charging): Slide the “Input” cover to the side and plug in the small end of the  included AC adapter. Plug the large end into an outlet. (Photo Above)

DC Charging

To charge with DC (car charging): Open the gray storage cover on the AirPump to access the DC charger, which is already wired into the AirPump. Plug the adapter into the charging port on your vehicle.

NOTE: even if your vehicle allows charging at any time, it is always recommended the vehicle is running when charging the AirPump to ensure no vehicle battery drainage.

Inflating Your AirTent

To inflate your AirTent, secure the hose tip (solid, short, roughly ⅝” in diameter) into the one-way valve on your AirTent.

Once the hose is firmly in the valve and the desired pressure is set on the screen, simply press the power button once and the AirPump will begin inflation. Once your tent reaches the desired pressure, the AirPump will stop.

Have More Questions? Send us an email!

Browse Other Categories